Home » Outdoor » Learn The Truth About Fence Treatment In The Next 60 Seconds | Roy Home Design

Learn The Truth About Fence Treatment In The Next 60 Seconds | Roy Home Design

Jammed Sliding Gate

Learn The Truth About Fence Treatment In The Next 60 Seconds | Roy Home Design

The jammed sliding gate will be a problem for you. You can check the track or the wheels to find out the problems. Wheels out of the track, the track is rusted, the wheels are worn out or there is something to block the wheels on the track are causes that often found. But, for a jammed track, you can give gear oil on the V-track and the wheels. If your track or gate is rusted, you can use rust remover that is available in spray or liquid form.

 

Re-paint Iron Fence

Learn The Truth About Fence Treatment In The Next 60 Seconds | Roy Home Design

Iron fence as a home security element will be continuously exposed to extreme weather changes. Cases that often occur are rusting, bubbling, cracking, and peeling paint. A dull fence will certainly reduce the beauty of your home.

  1. First, clean the iron fence surface from the stains and dirt. You can use a putty knife to do it.
  2. Scrape the fence using fine sandpaper then wipe it with a dry rag to remove all dirt and dust that is still attached on the fence surface.
  3. Apply polyester putty to smoothing the fence surface.
  4. After dry, sand the fence again using fine sandpaper.
  5. Coat the fence with an alkali paint as a base color. Apply it once more, but mix it with paint and thinner to make the paint color look brighter and spread perfectly.
  6. Next, brush it using iron paint according to the desired color. Wait up to 24 hours. Lastly, apply the finishing coating to make the paint last longer.

Tip: Use a new brush to make better results, spread evenly and not stripped. Avoid applying fence paint during the rainy season.

 

Re-paint Wood Fences

Learn The Truth About Fence Treatment In The Next 60 Seconds | Roy Home Design

The problem that often arises in wooden fences is damage due to termites, porous, and dull so it needs to be repainted to create a new look. For perfect results, follow the steps below to re-paint technique for wood fence.

  1. Sand the wood surface to make it smooth so the paint easily absorbed.
  2. If there is cracked wood, put putty first on the crack surface.
  3. Use anti-termite paints, apply it with a brush so the paint is easy to absorb.
  4. Re-sand the wood surface and coat it again with paint. This aims to make the paint result more sticky and evenly spread.
  5. To make the wood look more natural, heat the wood first to bring out the wood veins, then coat it using varnish.

Tips: To prevent termites from coming back, spray anti-termites at least once every six months. To prevent mold, coat the wood with natural-colored teak oil after the wood surface is sanded, before the paint is applied. Teak oil coating is also useful to keep the wood color to look like new.

See also: Fence For Around A House And Different Kinds Of It You Should Know

So, if you wish to receive the incredible pictures related to Learn The Truth About Fence Treatment In The Next 60 Seconds, press save link to save these pictures for your laptop. There’re ready for down load, if you appreciate and wish to get it, simply click save logo on the post, and it’ll be immediately saved in your laptop computer.

Thanks for visiting royhomedesign.com, article above Learn The Truth About Fence Treatment In The Next 60 Seconds published. Most people searching for specifics of fence treatment and paint and certainly one of these is you, is not it?

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.